Volume – czasowniki VDJScript
47 czasowników w kategorii Volume. Treść czasownika zostaje po angielsku.
- auto_crossfadeAutomatically crossfade to the other deck. You can specify the duration of the crossfade in ms: 'auto_crossfade 2000ms' Assigned to a slider, or specifying a specific position, it will move the crossfader slowly to that position: 'auto_crossfade 50%' or 'auto_crossfade 1000ms 50%'
- booth_volumeset booth volume
- colorfx_prefadercolor fx are prefader (required for some controllers)
- crossfadermove the crossfader. crossfader 0% will only let the left deck out, crossfader 100% will only let the right deck out.
- crossfader_curveselect the curve of the crossfader. enter a value to adjust the slope from a X curve (0%) to a inverted-U curve (100%). you can also specify common curves by name ("smooth", "full", "scratch", "cut"). or you can draw your own curve, using a syntax like 'crossfader_curve "0=[1,0]/0.5=[1,1]/1=[0,1]"'.
- crossfader_disabledisable the crossfader
- crossfader_hamsterinvert the crossfader.
- fake_eqtell VirtualDJ not to apply the equalizer to the sound output
- fake_filtertell VirtualDJ not to apply filter to sound output
- fake_gaintell VirtualDJ not to apply gain to the sound output
- fake_hptell VirtualDJ not to apply headphone volume to headphone sound output
- fake_hpmixtell VirtualDJ not to apply headphone mix to headphone sound output
- fake_mastertell VirtualDJ not to apply master volume to master sound output
- fake_mixertell VirtualDJ not to apply the volumes to the sound output
- fake_pfltell VirtualDJ to disable pfl switch from skin, when pfl can only be controlled from controller or mixer
- gainset the gain of a deck
- gain_labelget the text to display under the gain knob
- gain_relativechange the gain, relative to the software gain position
- get_crossfader_resultget the actual volume balance between deck 1 and 2, based on crossfader, levels, and play (use get_crossfader_result "full" to show levels even for paused decks)
- get_levelGet level of signal before master volume. If no deck is specified will get master level Use "get_level 'mic'" for microphone level, or "get_level 'sampler'" for sampler level Use "get_level 'vocal'" for vocal vu meter, other stem names also supported
- get_level_leftGet level of left channel before master volume. If no deck is specified will get master level.
- get_level_left_peakGet peak level of left channel before master volume. If no deck is specified will get master peak level.
- get_level_logSimilar to get_level, but returns level on logarithmic scale where -127dB=0.0 and 0dB=1.0
- get_level_peakGet peak level of signal before master volume. If no deck is specified will get master peak level.
- get_level_rightGet level of right channel before master volume. If no deck is specified will get master level.
- get_level_right_peakGet peak level of left channel before master volume. If no deck is specified will get master peak level.
- get_limiterreturn true if the limiter is compressing because the signal was saturated. Use 'deck 1 get limiter' to get the limiter on a deck in external mixer mode, or 'get_limiter' (or 'get_limiter "master") to get the limiter on the master for internal mixing mode (also can use 'get_limiter "headphones"' and 'get_limiter "booth"')
- get_vu_meterGet level of signal after master volume. If no deck is specified will get master level. Use "get_vu_meter 'mic'" for microphone level or "get_vu_meter 'sampler'" for sampler level Use "get_level 'vocal'" for vocal vu meter, other stem names also supported
- get_vu_meter_leftGet level of left channel after master volume. If no deck is specified will get master level.
- get_vu_meter_left_peakGet peak level of left channel after master volume. If no deck is specified will get master peak level.
- get_vu_meter_peakGet peak level of signal after master volume. If no deck is specified will get master peak level.
- get_vu_meter_rightGet level of right channel after master volume. If no deck is specified will get master level.
- get_vu_meter_right_peakGet peak level of right channel after master volume. If no deck is specified will get master peak level.
- headphone_crossfaderchange the PFL fader (0% is only the left deck, 100% is only the right deck).
- headphone_gainchange the gain of the PFL output (from -30dB to +30dB)
- headphone_mixchange the mix of the PFL (0% is only the cued deck, 100% is the master output).
- headphone_volumeset cue volume
- is_audibleactive if the deck is playing and volume is up (on-air)
- levelset the volume of the deck
- levelfader_curveselect the curve of the level faders. 0% is a linear curve, 50% (default) is a quadratic curve, 100% is a cubic curve
- master_balancechange the left/right balance on the master output.
- master_volumeset master volume
- mic_volumeSet the volume of the microphone
- mic2_volumeSet the volume of the second microphone
- mono_mixMix left and right channels together for all outputs
- muteMute a specific deck
- set_gainset the gain in order to bring the song to the specified dBA (with 0dBA being the maximum level outputable by the soundcard without compression): 'set_gain 0'