Controllers – VDJScript verbs

71 verbs in Controllers. The verb text stays in English.

• action_deckreturn true if the button calling this action is on the specified deck: 'action_deck 1 ? actionA : actionB'
• assign_controllerAssign a specific controller to this deck. 'deck 1 assign_controller "CDJ400" 2' assigns the second CDJ400 to deck 1 Or in a controller mapping 'deck 1 assign_controller' will assign the controller the action was executed from to deck 1.
• assign_related_controllerAssigns the related/companion controller.
• controller_batterycontroller_battery is listed as a VirtualDJ script verb in Controllers.
• controller_mappingAssign a mapping to a controller 'controller_mapping "My Mapping"' assigns the mapping 'My Mapping' to the controller the command was executed on 'controller_mapping "CDJ400" "My Mapping"' assigns the mapping 'My Mapping' to all CDJ400s 'controller_mapping "CDJ400" "My Mapping" 2' assigns the mapping 'My Mapping' to the second CDJ400
• controllerscreen_actionControls an on-device screen, e.g. 'powerdown' or 'standalone' (Denon PRIME screen skin).
• controllerscreen_deckcontrollerscreen_deck is listed as a VirtualDJ script verb in Controllers.
• denon_platterdenon_platter is listed as a VirtualDJ script verb in Controllers.
• device_sideAssign a different action for a button or slider of a device depending on which side of the device it is on: "device_side 'left' ? action_for_left : action_for_right" For more than 2-deck controllers, you can use "device_side 1 ? action1 : device_side 2 ? action2 ? device_side 3 ? action3 : etc..."
• display_timeset the mode to display time: "total", "remain", "elapsed", +1 or -1.
• djc_buttondjc_button is listed as a VirtualDJ script verb in Controllers.
• djc_button_popupdjc_button_popup is listed as a VirtualDJ script verb in Controllers.
• djc_button_selectdjc_button_select is listed as a VirtualDJ script verb in Controllers.
• djc_button_sliderdjc_button_slider is listed as a VirtualDJ script verb in Controllers.
• djc_paneldjc_panel is listed as a VirtualDJ script verb in Controllers.
• djc_shiftdjc_shift is listed as a VirtualDJ script verb in Controllers.
• effect_fxsendreturndeckeffect_fxsendreturndeck is listed as a VirtualDJ script verb in Controllers.
• effect_fxsendreturndeck_multiSelect which source to apply fx to for a specific send/return channel in case there are more than one 'deck 1 effect_fxsendreturndeck_multi master' : Apply master fx on the first fx send/return pair 'deck 2 effect_fxsendreturndeck_multi mic' : Apply mic fx on the second fx send/return pair 'deck 2 effect_fxsendreturndeck_multi 4' : Apply deck 4 fx on the second fx send/return pair
• effect_fxsendreturnenableeffect_fxsendreturnenable is listed as a VirtualDJ script verb in Controllers.
• gemini_waveform_zoomlevelgemini_waveform_zoomlevel is listed as a VirtualDJ script verb in Controllers.
• get_controller_imageUse in controller mappings to get the cover art from deck for use on controllers with screens
• get_controller_namereturn the name(s) of the controller(s) assigned to this deck
• get_controller_screenget_controller_screen is listed as a VirtualDJ script verb in Controllers.
• get_denon_cuepoints'get_denon_cuepoints 100' for a led bar with 100 leds. Number must match the number of leds in the led bar in the definition.
• get_denon_platterget_denon_platter is listed as a VirtualDJ script verb in Controllers.
• get_displayget some text to display. depending on the latest action, it can be the name of an effect, the folder being browsed, the title of the current song, etc... for multiline displays, you can add the line number: "get display 1", "get display 2".
• get_gemini_displayget_gemini_display is listed as a VirtualDJ script verb in Controllers.
• get_gemini_waveformget_gemini_waveform is listed as a VirtualDJ script verb in Controllers.
• get_ns7_platterget_ns7_platter is listed as a VirtualDJ script verb in Controllers.
• get_numark_beatgridget_numark_beatgrid is listed as a VirtualDJ script verb in Controllers.
• get_numark_songposget_numark_songpos is listed as a VirtualDJ script verb in Controllers.
• get_numark_waveformget_numark_waveform is listed as a VirtualDJ script verb in Controllers.
• get_pioneer_displayget_pioneer_display is listed as a VirtualDJ script verb in Controllers.
• get_pioneer_loop_displayget_pioneer_loop_display is listed as a VirtualDJ script verb in Controllers.
• get_rotation_cueget the angle of the cue point on the disc
• get_rotation_slipget the angle of the slip point on the disc when slip is active, or regular get_rotation otherwise
• invert_controllersInvert the deck of the controllers
• keyboard_shortcutsMap to CTRL or ALT. While pressed will show keyboard overlay in browser. Double-press to activate sticky keys. Accepts time to delay showing overlay (keyboard_shortcuts 500ms). In scripts can also be used to turn on or off the overlay manually (keyboard_shortcuts on)
• menudisplay a menu on the controller's screen, that allows to change the behaviour of the menu_buttons. you can navigate through the menu using the browser_scroll action'.
• menu_buttondefines a button whose behaviour can be changed by a menu. Syntax: 'menu_button 1 "hotcue,sampler,effect,loop"'.
• menu_cycledisplayon single-line controllers, cycle display when no menu is shown between artist - title, artist or title
• midiclock_activeToggle sending midiclock to the specified controller
• miditovst_activeToggle sending midi from a specific controller to the specified deck's VST instruments or effects
• mixer_orderFor controllers with 4 decks, specify the order of the decks, from left to right. Default: "mixer_order 3124"
• motor_switchassign this deck to be controlled by the motorized wheel
• motorwheel_instant_playwhen set to on, the song will start instantly, bypassing the ramp up time the motor takes to reach its full rotation speed (the drawback is that then you cannot hold the disc still when your start the motor)
• ns7_platterns7_platter is listed as a VirtualDJ script verb in Controllers.
• numark_waveform_zoomSet numark waveform zoom (value from 0 to 3, or +1, -1 to step through zoom levels)
• os2l_buttonSend a command to a DMX software over OS2L: 'os2l_button "blackout"', 'os2l_button "fog machine" while_pressed', etc. If you want to specify a page, you can use 'os2l_button "mypage" "mybutton"'. If the DMX software doesn't send feedback commands, os2l_button acts as a flash button (it sends 'on' when pressed, 'off' when released) - use 'os2l_button "mybutton" on' to not send commands on release. If the DMX software sends feedback commands, os2l_button acts as a toggle button (it sends the opposite of the last feedback when pressed, nothing on release) - use 'os2l_button "mybutton" while_pressed' to send a command on release.
• os2l_cmdSend a numeric command to a DMX software over OS2L: 'os2l_cmd 42 on' or 'os2l_cmd 43 50%' Second parameter can be script 'os2l_cmd 42 `get_var x`'
• os2l_infoos2l_info is listed as a VirtualDJ script verb in Controllers.
• os2l_scenesimilar to os2l_button, but sends 'on' to the DMX software only if the button was not active yet, and only if the deck is audible. (requires feedback from the DMX software) when the deck is not audible, the scene will be queued and started when the deck becomes audible os2l_scene "scene1" os2l_scene "mypage" "myscene"
• phase_activephase_active is listed as a VirtualDJ script verb in Controllers.
• phase_movementphase_movement is listed as a VirtualDJ script verb in Controllers.
• phase_positionphase_position is listed as a VirtualDJ script verb in Controllers.
• pioneer_cueOn when playing or paused on cue, blinking when paused and not on cue, off when no track loaded
• pioneer_playOn when playing, off when no track loaded, blinking when paused or playing with cue stutter
• rane_motor_enableRane motorised platter / timecode switch (hardware-specific).
• rane_timecodeRane motorised platter / timecode switch (hardware-specific).
• rane_timecode_enableRane motorised platter / timecode switch (hardware-specific).
• refresh_controllerrefresh the display of the specified controller (or all if none specified).
• reinit_controllerReinit the specified controller (or all if none specified), going through the exit and init sequences (you can specify a delay between exit and init: "reinit_controllers 'mycontroller' 200ms".
• rescan_controllersrescan for newly connected controllers.
• rzx_touchrzx_touch is listed as a VirtualDJ script verb in Controllers.
• rzx_touch_xrzx_touch_x is listed as a VirtualDJ script verb in Controllers.
• rzx_touch_yrzx_touch_y is listed as a VirtualDJ script verb in Controllers.
• select_master_outputSelect if the audio should be played on the computer speakers or on the controller audio output
• set_deckuse script or implicit variable to affect which deck the action is applied to example: 'set_deck `get_var varname` & play'
• shiftset or query the built-in shift variable, used for controllers
• show_textShow text on controller display. (If your controller uses get_display for the displays) "show_text 'Line 1|Line 2' 3000ms" will show 2 lines of text for 3 seconds (time optional, | separates lines) "show_text '$myvar$'" shows the contents of the variable $myvar
• v7_statusv7_status is listed as a VirtualDJ script verb in Controllers.

VirtualDJ controllers